Adamas gloves, knitting without glass fiber or steel fiber, offer a soft and comfortable hand feeling. It can meet ANSI/ISEA 105 standards, consis-tently achieving A6 or higher level.
This eliminates skin irritation caused by broken glass fibre or steel fiber, while the finished products can withstand repeated washing, enhancing the cost-effectiveness of end products. They are highly sought after by manufacturers both domestic and abroad.
Comparison of fiber-knitted glove blanks. From Xingyu Lab.
15 times higherthan steel fiber
5.23 times higherthan aramid fiber
42.8% higher thanconventionalcut-resistant fibers
87.8% lighter thansteelfiber
Zero allergenscompared toconventional
6.14 times higherthan aramid fiber
Three internationally recognized test methods measure the cut resistance of palm materials — understand the levels before choosing your glove.

Higher on cut index compared with standard HPPE.

Glass fiber and Steel Free! FDA food contact approval and OEKO-tex certified skin friendly.

Alternative knitting option on 21g, 18g,15g and 13g between A2-A9 solution.

Registered,US,EU,CN,RU,Latin America etc.
Adamas is our patented yarn, made from ultra-high molecular weight polyethylene (UHMWPE), designed for use in gloves offering cut protection. Below are the core properties of Adamas yarn relevant to this application.
15×
stronger than steel by weight
High Strength-to-Weight Ratio
With a density of 0.97 g/cm³, Adamas provides robust cut resistance in a lightweight form, enhancing comfort for glove wearers.
Low
coefficient of friction
Low Friction
Contributes to smoother glove surfaces, reducing drag and wear during handling tasks.
Long
term durability
Abrasion Resistance
The yarn’s ability to withstand friction and wear maintains protective performance through repeated use.
UV
chemical & moisture resistant
Chemical & Environmental Stability
Ensures glove reliability in diverse work environments, such as wet or outdoor conditions.
High-performance Cut-Resistant Yarn
Benchmark products 400D PE: traditional 13g HPPE cut-resistant gloves, pure Adamas glovesoffers superior cut-resistant performance far exceeds that of ordinary HPPE.
Benchmark products 400D PE : traditional 13g HPPE cut-resistant gloves, pure Adamas gloves remained smooth and intact, while the other products all showed signs of yarn breakage and exposed fibers.
High-performance Cut-Resistant Yarn
Benchmark products 400D PE : traditional 13g HPPE cut-resistant glovesafter 10 minutes hands rub, pure Adamas@ yarn remained smooth and intact, while the others all exhibited broken yarns and exposed fibers.
Benchmark products 400D PE: traditional 13g HPPE cut-resistant gloves, pure Adamas gloves provides a cooler feel.
High-performance Cut-Resistant Yarn
Benchmark products 400D PE : traditional 13g HPPE cut-resistant glovesafter 10 minutes hands rub, pure Adamas@ yarn remained smooth and intact, while the others all exhibited broken yarns and exposed fibers.
Benchmark products 400D PE : traditional 13g HPPE cut-resistant gloves, pure Adamas R gloves have a lower densityand floats on the water, while the other fabrics all sink to thebottom.
Benchmark products 400D PE : traditional 13g HPPE cut-resistant gloves, after softness test, pure Adamas gloves have lower test values and are softer.
High-performance Cut-Resistant Yarn
After 7 days of heat-oxygen aging, the pure Adamasgloves showed a performance decline of 0.26%, with theirproperties remaining stable, having the best effect. Incontrast, the cut-resistant gloves made from other materialsdeclined significantly.
After 24 hours of UV exposure, the pure Adamas® glovesshowed virtually no change in cut-resistant performance,while gloves made of other materials all exhibited obviously declined in performance.
After two hours of soaking in saltwater, the steel wireshowed clearly rusty, while the Adamas yarn remainedunchanged, having the best effect.
Twelve models across gauges, coatings and cut levels.








Send us your application and required cut level we will ship a sample pair for your own testing.